Thoroughly scuff the surfaces of the cabinet with grit sandpaper—enough to get a dusting, but not so much that you tear through the paper-thin laminate surface—and clean up any dusty remains with a handheld vacuum and a damp cloth. If you opt for a primer, choose a bonding primer tenacious enough to stick to laminate view example on Amazon , and then top it with an oil- or latex-based paint after the primer has cured.
If you select a paint that can be applied directly over laminate view example on Amazon , you can skip the primer—just know that this qualification may limit your color choice. But first, double-check that your stock is well suited for the job.
Testing its bonding capabilities before diving into an entire paint job could save you from a case of peeling paint down the road—and the need to redo hours of work. Apply your paint to a small, inconspicuous area of the cabinet like the back of one you hardly ever open , let it cure, then inspect the bonding.
If you spot some bubbles in the coat, that means it is not adhering well; consult a paint dealer at your hardware store to pinpoint a more suitable paint for the job.
If your first-choice paint applicator for the traditionally flat surface of laminate cabinets is a brush, take a moment to reconsider. These popular paint tools tend to leave an unsightly trail of brush strokes in their wake. Opt instead for a roller, sprayer, or a paint pad for a streak-free finish. Due to the powerful fumes released from the primer and paint and your close proximity to them when painting laminate cabinets , increase ventilation in the room and keep out children and pets.
Bare particleboard can also be primed and painted. The finish paint should be a high-quality enamel, either semigloss or gloss. Q-I recently bought a house with pine paneling in the den and kitchen.
All of the pine has been finished with a wretched orange-shellac finish. A painter advises me just to paint over it. Do you know of a process for getting rid of the orange shellac so I can restore the light appearance of the paneling? A-Old shellac can often be softened with shellac thinner or denatured alcohol and scraped off. However, the thinner is highly flammable and the vapors are harmful if breathed for long.
Also, it would be difficult to work with the thin, runny solution on a vertical surface, such as paneling. A paint-remover heat gun is another possibility for removing the shellac, though this procedure will also be messy and tedious.
Follow all of the same prep steps with care, then take your cabinet fronts and drawers outside or meticulously cover everything else in the room before spraying.
Source a professional-quality sprayer and remember this mantra: multiple thin coats, not one thick one. Search for:. Now is the time to deep-clean. You can come back from black. Use the hard stuff. The magic number? Photograph by Matthew Williams. Have glass-fronted or open cabinets?
Be sure to paint the interiors, too. Tired of blue? Try yellow.
0コメント